Setup and Tuning
Wild Turbo Fan – WTF 30mm x 10mm High Speed Fan
Availability:
Out of stock
30mm x 10mm high speed fan with dual ball bearings and extension wire. Runs off both receiver (6v) and 2S battery (8.4v) voltages.
Max. RPM in 22,000 @8.4v
$16.95
Out of stock
CompareRelated products
-
Tools, Setup and Tuning
SkyRC Brushless Motor Anaylzer
SKYRC motor analyzer is a precision electronic device that is especially designed for measuring the KV value, RMP, current drawn, motor timing, vibration noise level and checking the function of hall effect sensors of a brushless motor. It comes with a 2X16 characters LCD that is able to display real time measuring value of either sensor or sensor-less brushless motor.
This is the latest version which will go past the 50 deg timing.
SKU: SK-500020 -
Tools, Setup and Tuning
SkyRC Diff Analyzer For 1/10 RC Cars
The SkyRC Differential Analyzer is a must have tool for setting up and fine-tuning the hardness of differentials for 1/10th scale cars. The Diff Analyzer provides numeric data that helps you replicate a specific hardness, and duplicate your setup after a re-build. No more guessing, no more trying to feel by hand. Now you can get numeric values you can use to measure the diff setting, ensuring consistent hardness after building and setup.
Tiny but Versatile:
The analyzer is powered by any universal Micro USB output or a power bank, weighs just 59 grams and measures 54x28x24.8mm. A precision machined aluminum enclosure creates a thin, durable and aesthetically pleasing design. It includes two 1/10th scale adapters – a hex type adapter for measuring the diff from the wheel nut, and a pin type for measuring from the diff outdrive. Adapters for 1/8th scale and Mini-Z are available separately (not included).How to Use:
Connect Diff Analyzer to a power bank or any regular Micro 5V USB port.
Connect the diff to the Diff Analyzer and press the power button. Diff Analyzer will show a numeric value for diff being tested. Test duration lasts around 3-5 seconds. Repeat the same procedure for other diffs to have numeric values to compare.SKU: SK-500026-03 -
Tools, Setup and Tuning
SkyRC 1/10 Offroad Buggy Setup System Station SK-600149-01
Thanks to this setup system set in elegant black, which was specially designed for 1/10 buggies, almost all important parameters can be optimized conveniently and easily. After all, the better a RC car is set up, the more fun it gets when racing on the next track.
Adjustable Parameters
- Camber (+/- 10°)
- Toe (+/- 40°)
- Caster (+/- 20°)
- Steering
Includes
4x Measurement gauges for each suspension
1x Toe gaugeSKU: SK-600149-01 -
Tools, Setup and Tuning
SkyRC Corner Weight System
This Corner Weight System is designed for serious racers to measure their cars’ corner weight distribution easily and make necessary weight adjustment to balance their cars for the best performance.
Corner weight scales allow precise car weight distribution which is critical to on track success. The four corners of the car may be bearing different amounts of the car weight. The unequal corner weights can be felt as the car rolling more when turning in one direction than the other. The car’s stability is compromised which will adversely affect its balance. A well balanced car is generally easier to drive quicker due to increased the car’s stability.
To make sure weight percentages are correct, computerized scale system must be used. Correct chassis setup separates the front runners from the followers. Corner Weight Scales provide the necessary data for anyone to become a chassis expert.
Features:
•Designed for 1/8 buggy and truck, 1/10 buggy & touring car and 1/12 cars.
•Measure the car’s corner weight, front and rear distribution and make adjustment if necessary.
•The maximum weight limit for each scale is 2000 grams(total 8000 grams).
•Measurements can be displayed in gram, oz.
•Highly accurate weight measurement in 0.1g increments (equivalent to 0.01 oz).
•4 red LED screens for displaying each corner weight measurement.
•2 green LED screens for displaying front weight and rear weight.
•2 green LED screens for displaying corner weighting(front right + rear left, front left + rear right).
•1 green LED screen shows total weights.
•4 LED screens for displaying percentage of weights distribution. 4 large, easy to clean aluminum weighting surface and easy to use 3 button operation.
•Powered by 4 x AA batteries (batteries NOT included) or external DC source(6-13.8V).Eligible for FREE shipping!
SKU: SK-500015
There are no reviews yet.