SkyRC
Showing all 6 results
-
Setup and Tuning, Tools
SkyRC BD250 Battery Discharger Analyzer LiPo/LiHV/NiMH
The BD250 is a powerful discharging device that allows the user to discharge a battery at up to 35 amps or 250 watts and also measures and compares the performance of batteries. BD250 allows for the precise measurement of battery capacity and takes the guesswork out of choosing the best battery for your application.
Works on LiPo/LiHV/NiMH.
Upgraded from BD200, BD250 is not only a powerful discharging device but also a precise measurement tool for battery capacity. It takes the guesswork out of choosing the good-performance battery for your application. BD250 offers a maximum of 250 Watts/35 Amps to discharge your battery and will test virtually any battery type or size, any chemistry cells. It’s stylish but small with a high-performance cooling system and uses MOSFETS from the well-known IXYS, to make sure it can discharge at 250 watts continuously.
Size and Weight:
Dimension: 136.6×104.8x107mm
Weight: 879gPower:
Accepted Voltage Range: 5.40-35.00V
Low Voltage Alert: <5.2V High Voltage Alert: >35V Max.
Discharge Power: 250WDischarge:
Discharge Current Range: 0.01A-35.00A
Discharge Power: 250WSKU: SK-600133 -
Setup and Tuning, Tools
SkyRC Brushless Motor Anaylzer
SKYRC motor analyzer is a precision electronic device that is especially designed for measuring the KV value, RMP, current drawn, motor timing, vibration noise level and checking the function of hall effect sensors of a brushless motor. It comes with a 2X16 characters LCD that is able to display real time measuring value of either sensor or sensor-less brushless motor.
This is the latest version which will go past the 50 deg timing.
SKU: SK-500020 -
Setup and Tuning, Tools
SkyRC Corner Weight System
This Corner Weight System is designed for serious racers to measure their cars’ corner weight distribution easily and make necessary weight adjustment to balance their cars for the best performance.
Corner weight scales allow precise car weight distribution which is critical to on track success. The four corners of the car may be bearing different amounts of the car weight. The unequal corner weights can be felt as the car rolling more when turning in one direction than the other. The car’s stability is compromised which will adversely affect its balance. A well balanced car is generally easier to drive quicker due to increased the car’s stability.
To make sure weight percentages are correct, computerized scale system must be used. Correct chassis setup separates the front runners from the followers. Corner Weight Scales provide the necessary data for anyone to become a chassis expert.
Features:
•Designed for 1/8 buggy and truck, 1/10 buggy & touring car and 1/12 cars.
•Measure the car’s corner weight, front and rear distribution and make adjustment if necessary.
•The maximum weight limit for each scale is 2000 grams(total 8000 grams).
•Measurements can be displayed in gram, oz.
•Highly accurate weight measurement in 0.1g increments (equivalent to 0.01 oz).
•4 red LED screens for displaying each corner weight measurement.
•2 green LED screens for displaying front weight and rear weight.
•2 green LED screens for displaying corner weighting(front right + rear left, front left + rear right).
•1 green LED screen shows total weights.
•4 LED screens for displaying percentage of weights distribution. 4 large, easy to clean aluminum weighting surface and easy to use 3 button operation.
•Powered by 4 x AA batteries (batteries NOT included) or external DC source(6-13.8V).Eligible for FREE shipping!
SKU: SK-500015 -
Setup and Tuning, Tools
SkyRC LED Pit Light
Skyrc LED pit light with motion sensor to control the brightness of LED. The LED pit light also featured a fold-able design with an aluminum tray for small parts and screws to keep your pit table clean and organised. This LED pit light can be used with a DC power source.
SKU: SK-600089 -
Setup and Tuning, Tools
SkyRC RSTW Pro Tire Warmer
SKYRC RSTW Tire Warmers are designed to pre-heat rubber tires for 1/10 size touring car.
Features:
• Front & Rear temperature can be set independently
• Temperature of 4 tires is controlled by MCU
• Removable front & rear tire warmers
• 8 different beep tones
• Minimum temperature
• Celsius – Fahrenheit selectable display
• Four LED indicators
• Safety timerSKU: SK-600064 -
Setup and Tuning, Tools
SkyRC Tire Sander
SkyRC Rubber Tire Sander can be powered by a 12V power supply, as well as powered directly from a 2S LiPo battery! The Tire Sander is a quick and easy way to remove the seam from the center of a new tire, without having to take 2-3 laps around the track.
Features:
• Rubber tire sander for touring class
• Powerful high torque DC motor with dual metal bearings
• Adjustable RPM of motor
• 8 LEDs indicate tire running RPM
• Light-weight aluminum case
• Quiet operation
• Protection: Input reverse polarity protection
• Tire running rotation can be changedSKU: SK-600072