-
-
-
2S Lipo, Batteries
Evolution 4000mAh 110C 2S 7.4v Drag Racing Lipo Battery Pack w/XT90 Connector
Our Drag Racing Series Lipo Packs were designed using the highest quality cells and geared for today’s demanding competition drag racing environment. They produce the lowest IR and highest average voltage, making them best in breed.
These are soft case packs and come with 8awg wire and XT90 connector.
High AV, Low IR. Rated at continuous 110C, 220C burst.
– 110C discharge rating
– Low Resistance
– High AV
– 8awg wire
– XT90 connector
– Dimensions: 96.5mm(L)x44.5mm(W)x23mm(H)
– Weight: 236gSKU: SZED401102S -
2S Lipo, Batteries
Evolution 5500mAh 130C 2S 7.4V Slim Lipo
Slim Pack rated at continuous 130C. Standard 5mm connectors.
The slim design allows you to further fine tune the handling characteristics of your car.
– 130C discharge rating
– Low Resistance
– High AV
– Slim Design
– 5mm connectors
– Dimensions: 139mm(L)x37.3mm(W)x24.8mm(H)
– Weight: 238g
– Meets ROAR, EFRA, BRCA, and IFMAR specsSKU: SZE5532SSB -
2S Lipo, Batteries, Shorty
Evolution 6000mAh 130C 2S 7.6V LiHV Shorty Lipo Battery Pack
High AV, Low IR. Rated at continuous 130C.
Many hours of testing went into the cell composition design, resulting in the pack’s ability to offer the same resistance and average voltage characteristics when running at either normal lipo peak voltage of 4.2v per cell or LiHV peak voltage of 4.35v per cell.
Standard 5mm connectors.
– High capacity for maximum duration
– 130C discharge rating
– Low Resistance
– High AV
– 5mm connectors
– Dimensions: 96mm(L)x47mm(W)x25mm(H)
– Weight: 215g +/- 2g
– Meets ROAR, EFRA, BRCA, and IFMAR specsSKU: SZE601302SB-S -
2S Lipo, Batteries, LCG
Evolution 6400mAh 130C 2S 7.4V LCG Lipo Battery Pack
The best performing 2S LCG pack we have ever offered!
High capacity, High AV, Low IR.
LCG Pack rated at continuous 130C. Standard 5mm connectors.
The low-profile design allows you to further fine tune the handling characteristics of your car.
– High capacity for maximum duration
– 130C discharge rating
– Low Resistance
– High AV
– Low Profile
– 5mm connectors
– Dimensions: 139mm(L)x47mm(W)x22.4mm(H)
– Weight: 290g
– Meets ROAR, EFRA, BRCA, and IFMAR specsSKU: SZE6432SLB -
2S Lipo, Batteries
Evolution 6400mAh 200C 2S 7.4v Drag Racing Lipo Battery Pack w/XT90 Connector
Our Drag Racing Series Lipo Packs were designed using the highest quality cells and geared for today’s demanding competition drag racing environment. They produce the lowest IR and highest average voltage, making them best in breed.
These are soft case packs and come with 8awg wire and XT90 connector.
High AV, Low IR. Rated at continuous 200C.
– 200C discharge rating
– Low Resistance
– High AV
– 8awg wire
– XT90 connector
– Dimensions: 87mm(L)x65mm(W)x35.5mm(H)
– Weight: 384gSKU: SZED6422S -
1S Lipo, Batteries
Evolution 8500mAh 130C 1S 3.7V Lipo Battery Pack
High AV, Low IR. Rated at continuous 130C.
Standard 5mm connectors.
– High capacity for maximum duration
– 130C discharge rating
– Low Resistance
– High AV
– 5mm connectors
– Dimensions: 93mm(L)x47mm(W)x18.5mm(H)
– Weight: 164g
– Meets ROAR, EFRA, BRCA, and IFMAR specsSKU: SZE8531SB -
ESC
Evolution SC80 80A Spec ESC
The SC80 electronic speed controller (ESC) is specifically designed for 1/10 scale SPEC class electric R/C racing and is suitable for both off-road and on-road classes. It comes factory set in “blinky” mode with the same setup of United States Stock TC ACE Dave Johnson. And although the factory default setting is an optimized setup for “blinky” mode, an optional program box is available to customize settings to suite driving styles in “blinky” mode as well as non-“blinky” mode. The controller is a small foot print 2S LiPo compatible, has a 9.5T and above motor limit and comes with factory installed wires, capacitor and fan.
Specifications:
Continuous Current: 80A
Battery Input: 2S LiPo, 2S LiFe, 4-8 cells NiMh/NiCd
Built-in BEC: 6V@5A
Motor Limit: Over 9.5T
Motor Type: 540 size 2 pole sensored brushless
Size: 32mm(L) x 26mm(W) x 24mm(H – with fan)
Weight: 52g (with fan, wires and capacitor)
ROAR Approved!
SKU: SZESC80 -
Setup and Tuning, Tools
SkyRC BD250 Battery Discharger Analyzer LiPo/LiHV/NiMH
The BD250 is a powerful discharging device that allows the user to discharge a battery at up to 35 amps or 250 watts and also measures and compares the performance of batteries. BD250 allows for the precise measurement of battery capacity and takes the guesswork out of choosing the best battery for your application.
Works on LiPo/LiHV/NiMH.
Upgraded from BD200, BD250 is not only a powerful discharging device but also a precise measurement tool for battery capacity. It takes the guesswork out of choosing the good-performance battery for your application. BD250 offers a maximum of 250 Watts/35 Amps to discharge your battery and will test virtually any battery type or size, any chemistry cells. It’s stylish but small with a high-performance cooling system and uses MOSFETS from the well-known IXYS, to make sure it can discharge at 250 watts continuously.
Size and Weight:
Dimension: 136.6×104.8x107mm
Weight: 879gPower:
Accepted Voltage Range: 5.40-35.00V
Low Voltage Alert: <5.2V High Voltage Alert: >35V Max.
Discharge Power: 250WDischarge:
Discharge Current Range: 0.01A-35.00A
Discharge Power: 250WSKU: SK-600133 -
Setup and Tuning, Tools
SkyRC Bluetooth Corner Weight System SK-500036
This is the SKYRC Bluetooth Corner Weight System For 1/10 1/12 1/8 RC. RC cars run off the track, tip over, run with tires wore eccentric from time to time. These are the typical results of incorrect CG(Center of Gravity) due to the unbalanced four wheels. Uneven wheel weight distribution will cause the car to sway more in one direction than others. In this circumstance, the car will run unstable, difficult to control!
The enhanced SKYRC SCWS2000 can help RC drivers easily measure and view the RC car’s corner weight distribution through the App. With the accuracy of 1g, RC drivers can precisely adjust their car’s weight at each corner to the best balance to win the race.
Even the slightest difference in weight has a significant difference for RC hobbyists when it comes to the race’s performance and the car’s condition! High-quality aluminum with good toughness is selected as the sensor rebound material. Through the rigid and harsh manufacturing process, we created a high-precision I-shaped sensor. To improve the overall accuracy, the measurement algorithm is enhanced from the predecessor: the precision can be obtained in the shortest time. The default unit is Gram, and switching to Ounce is also available! When inaccuracy is found, the customized in-app program can get the calibration done quickly by tapping the screen three times.
This corner weighting system is empowered by the latest Bluetooth 5.0 chip, which results in faster and more stable connection. When connected with the phone, the last century segment LED as the predecessor is enhanced the intuitive display in full screen!
SKYRC smart weighing system is small and portable in size. It can accurately measure the weight distribution at the racing car’s four corners. So RC racer can quickly adjust the weight at each corner to the best balance effect and win the race.
The App simulates practical scenarios to b intuitive and straightforward. The diagonal wheels are highlighted contrastingly in orange to indicate the selection. This is exactly the RC hobbyists’ paint point when balancing and distributing the weight! The weight and protocol data are transmitted to the mobile App in real-time via Bluetooth. The APP can set each scale by coordinate and save the real-time weight at the respective corner. The total diagonal weight is automatically calculated on the go!
The native emphasis on the ultra-low power consumption of Bluetooth 5.0 and our proprietary protocol get a CR2450 lithium coin battery to deliver the long-lasting, dependable performance of continuous 30 hours.
In the circumstance of the racing field, RC hobbyists use the scales together with the possibility of mixing and getting messed up. Protection with a password will bring peace of mind!
Features:
For: 1/10 1/12 1/8 RC Drift / Touring
Material: Plastic
Color: Black
App-enabled and data display in realtime via Bluetooth
Designed for drift, touring cars
Unit switchable between gram and oz.
Powered by 4 x coin & button batteries.
Measure the car’s corner weight, front and rear distribution and make adjustment if necessary.
The maximum weight limit for each scale is 2000 grams ( total 8000 grams )
Accurate measurement in 0.1g increments ( equivalent to 0.01 oz )
BLE 5.0: Faster Connectivity and higher performance
Long-lasting power on coin battery
Support for 4 languagesSpecifications:
Dimension: 68x68x22.5mm
Net weight of each scale: 70g
Rated Voltage: 2.6V-3.6V
Rated Current: <10mA@DC3V Battery: CR2450 3V Lithium Coin Battery Maximum weight of each scale: 2000g Tolerance: ±0.1g / 0.1oz Resolution: ±0.1g / 0.01oz Includes: SKYRC Bluetooth Corner Weight System (1 set)SKU: SK-500036 -
Setup and Tuning, Tools
SkyRC Brushless Motor Anaylzer
SKYRC motor analyzer is a precision electronic device that is especially designed for measuring the KV value, RMP, current drawn, motor timing, vibration noise level and checking the function of hall effect sensors of a brushless motor. It comes with a 2X16 characters LCD that is able to display real time measuring value of either sensor or sensor-less brushless motor.
This is the latest version which will go past the 50 deg timing.
SKU: SK-500020 -
Setup and Tuning, Tools
SkyRC Diff Analyzer For 1/10 RC Cars
The SkyRC Differential Analyzer is a must have tool for setting up and fine-tuning the hardness of differentials for 1/10th scale cars. The Diff Analyzer provides numeric data that helps you replicate a specific hardness, and duplicate your setup after a re-build. No more guessing, no more trying to feel by hand. Now you can get numeric values you can use to measure the diff setting, ensuring consistent hardness after building and setup.
Tiny but Versatile:
The analyzer is powered by any universal Micro USB output or a power bank, weighs just 59 grams and measures 54x28x24.8mm. A precision machined aluminum enclosure creates a thin, durable and aesthetically pleasing design. It includes two 1/10th scale adapters – a hex type adapter for measuring the diff from the wheel nut, and a pin type for measuring from the diff outdrive. Adapters for 1/8th scale and Mini-Z are available separately (not included).How to Use:
Connect Diff Analyzer to a power bank or any regular Micro 5V USB port.
Connect the diff to the Diff Analyzer and press the power button. Diff Analyzer will show a numeric value for diff being tested. Test duration lasts around 3-5 seconds. Repeat the same procedure for other diffs to have numeric values to compare.SKU: SK-500026-03 -
Setup and Tuning, Tools
SkyRC Digital Camber Gauge 1/10 Touring Car CTG-015
With a nonstop passion for RC car racing, SkyRC upgraded its mechanical predecessor with Bluetooth. The must-have RC Gears app definitely brings smartness to this gauge. Now our racers can measure the RC car’s camber and toe angle and read the data on the phone and on the fly! RC suspension tuning made easy and smarter!
When it comes to RC grade racing, so many adjustments can contribute to the handling and performance of the vehicle. Adjusting Camber and Toe are vital adjustments to affect how your touring car performs on the straights and the turns. Toe In/Toe Out can be adjusted to increase or decrease steering and steering response.
Camber is the relationship of the tire to the ground, such that a tire that is perpendicular to the racing surface has zero camber. If the top of the tire leans in toward the car, it has negative camber; likewise, a tire that leans outward at the top has positive camber. Most RC touring cars will benefit from a negative camber degree, resulting in a slightly wider width and more static tire grip on the track surface, benefiting the turns and reducing roll-overs.
On your setup wheels, in your race wheels, or next to your setup station, CTG-015 will give you incredibly accurate readings on the camber angle of your wheels. The toe-tuning and camber-adjusting allow you to achieve your perfect tire wear and traction point. This accurate gauge allows you to tweak your camber and camber gain settings, finding peace of mind that you are following a precise, replicable and trustworthy measurement tool. All data can be read and kept on the phone!
SkyRC CTG-015 Digital Camber Gauge is built with Bluetooth 5.0, which enables a faster and more stable connection. The app instantly displays real-time data once connected. SkyRC Camber & Toe Gauge is even smaller than half iPhone 13 in size, convenient to carry around. The charge port is USB Type-C which is accepted as the de facto connector today, so most mobile phone cables can easily handle the charging.
Feature:
For: 1/10 RC Touring Car
Material: Metal
Color: Black
Empowered edge for RC Gurus
Camber and Toe Gauge Gets Bluetooth
App control Real-time Display Via Bluetooth
High Accuracy
Measure Camber & Toe
Small & PortableSKU: SK-500042-01 -
Setup and Tuning, Tools
SkyRC RSTW Pro Tire Warmer
SKYRC RSTW Tire Warmers are designed to pre-heat rubber tires for 1/10 size touring car.
Features:
• Front & Rear temperature can be set independently
• Temperature of 4 tires is controlled by MCU
• Removable front & rear tire warmers
• 8 different beep tones
• Minimum temperature
• Celsius – Fahrenheit selectable display
• Four LED indicators
• Safety timerSKU: SK-600064 -
Drag Racing, Modified Motors, Motors
Speedzone 1.5T Drag Racing Brushless Motor
Features:
– Adjustable timing
– High RPM precision bearings
– High Temp high purity copper stator wire
– Super Flow power solder tabs
– CNC-machined Billet T6 aluminum can
– Powered sintered neodymium magnet
– Maximized Airflow
– Fully rebuild-able
– Lightweight design and components
– Low Resistance Stator
– Strict Tolerance Sensor Board
– Meets ROAR, IFMAR and EFRA specs
– Comes with 12.5mm high torque rotorSKU: SZBLM15