The SkyRC BD350 (40A/350W) Battery Discharger and Analyzer is more than a simple battery discharger. It is a powerful test instrument that measures, graphs and compares the parameters of various batteries. It allows for the precise measuring of battery capacity and performance. No more guesswork anymore when choosing the best battery for RC racing! In addition, the BD350 discharger supports most RC batteries and works with SkyRC T1000 and D200 NEO chargers to provide a discharge current and power of up to 40A and 350W! Pair with (D200 NEO Dual Charger – sold separately) for a maximum rapid discharge current of 40A and maximize the capability and output of both devices. Please read the instructions and warning list prior to operating the SkyRC BD350.
Related products
-
iCharger, Chargers
iCharger X6
The highest power density charger on the market, the X6 is an 800W charger capable of a full 30A rate on LiPos up to 6S. With a balance current of a full 2A, charges will finish faster than ever. The full color IPS display provides a wealth of information at a glance, using the operating system perfected on the larger Duo iChargers.
The X6 can charge at up to 30A, and it can also discharge at up to 30A! While similar size chargers limit their discharge capabilities, the X6 offers iCharger’s trademark support for regenerative discharge, allowing the charger to provide a full 800W of discharge capability when powered from a suitable battery bank.
Despite its small size and low price, this is still a full featured iCharger, with multi-chemistry support and all the depth of settings you’ve come to expect, including an improved software interface for recording battery data and upgrading firmware.
Specifications:
Net weight: 168g
Dimension: 83x65x37 ±0.5mm
Input Voltage Range: 10.0—32.0VDC
Maximum Input Current Limit: <35A
Maximum Charge/Discharge Current: 30A
Maximum Charge Power Capacity: 800W
Maximum Discharge Power Capacity: 30W
Maximum Regenerative Discharge Power Capacity: 800W
Maximum Extra Discharge Power Capacity: 900W @30V/30A
Maximum Current Drain for Balancing: >2ASKU: X6 -
Ultra Power, Chargers
Ultra Power UP1350W
40 Amp charging ability
DC Input Voltage: 11-30V
Charge Circuit Power: 1350W
Charge Current: Max. 40.0A
Discharge Circuit Power: 80W
Discharge Current: 0.1-8.0ACurrent drain for balancing LiPo: 800mA/cell
Lipo/LiFe/LiIon/LiHv Cell Count: 1-8S
NiMH/NiCd Battery Cell Count: 1-20S
Pb Battery: 2-24V
Balance Port Charge Current: 10-500mA
Regenerative Discharge Current: 0.1-10.0ATrickle Charging Current: 50mA-300mA & OFF
Weight: 1.28kg
Dimension: 133x153x77mm
SKU: UP1350W -
iCharger, Chargers
iCharger 4010 DUO Charger Discharger
40A 2000W Dual Port Battery Charger Discharger
4010DUO Special Features
1. The 4010DUO uses advanced Synchronous buck-boost DC/DC converter technology, high power, and high current and high-performance power conversion circuit. The maximum charge power capacity up to 2000W, the maximum charge/discharge current of channel up to 40A, and two channels in Synchronous Mode up to 70A.
2. Channel Supports 10s LiPo, Lilo, LiFe, with maximum 1.2A balance current, adopts unique balance calculation of internal resistance correction .
3. Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan speed.
4. Internal temperature protection. When the internal temperature exceeds the reduce temperature, the output power is automatically reduced; and the charger will shut down when temperature exceeds the cut-temperature.
5. 64 parameters sets can be saved, without repeat setting when use, just import/export via SD card.
6. TFT LCD screen that provides rich information including current, voltage, power, capacity, internal resistance, control status, time-consuming and temperature, etc.
7. Multi-discharge features: discharge-self, regenerative to input discharge, regenerative to channel discharge, and lithium battery extra expanding discharge.
8. Support measurement for internal resistance of battery offline and online. Can measure not only the internal resistance of the entire battery pack, but also measure the per-cell internal resistance of lithium battery.
9. The iCharger has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity, time overrun and maximum power etc.
10. Supports upgrading the hardware program by USB port. The iCharger also supports the “Logview” software and can display, plot and analyze the charge and discharge data by it. (See detail information about Logview in the following website: http://www.logview.info)
SKU: 4010DUO
