Ultra Power UP1350W
40 Amp charging ability
DC Input Voltage: 11-30V
Charge Circuit Power: 1350W
Charge Current: Max. 40.0A
Discharge Circuit Power: 80W
Discharge Current: 0.1-8.0A
Current drain for balancing LiPo: 800mA/cell
Lipo/LiFe/LiIon/LiHv Cell Count: 1-8S
NiMH/NiCd Battery Cell Count: 1-20S
Pb Battery: 2-24V
Balance Port Charge Current: 10-500mA
Regenerative Discharge Current: 0.1-10.0A
Trickle Charging Current: 50mA-300mA & OFF
iCharger 308DUO0 out of 5(0)
30A 1300W Dual Port Battery Charger Discharger – Eligible for FREE shipping!
308DUO Special Features
1 The 308DUO uses advanced Synchronous buck-boost DC/DC converter technology, high power, a high current and high-performance power conversion circuit. The maximum charge power capacity is up to 1300W, the maximum charge/discharge current of a channel is up to 30A, and two channels in Synchronous Mode are up to 50A.
2 Each channel supports 8s LiPo, Lilo, LiFe and NiZn batteries, with maximum 1.2A balance current, and adopts a unique balance calculation of internal resistance correction. Supports 1-20s NiMH/NiCd batteries and 1-15s Pb batteries..
3 With 1A/5V USB charging port, convenient for the user to charge mobile phones and PCs.
4 When the channel output connects the battery after the charger powers on, it will start automatically the anti-sparking protection.
5 Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan speed.
6 Internal temperature protection. When the internal temperature exceeds the Power Reduce temperature, the output power is automatically reduced; and the charger will shut down when temperature exceeds the Shut-down temperature.
7 This charger can save 64 parameters sets and supports the data import/export to SD card
8 A 2.8-inch LCD screen provides rich information including current, voltage, power, capacity, internal resistance, control status, time-consuming and temperature, etc.
9 Multi-discharge features: self-discharge, regenerative to input discharge, and lithium battery extra expanding discharge.
10 Supports measurement for internal resistance of battery offline and online. Can measure not only the internal resistance of the entire battery pack, but also measure the internal resistance of each cell within the lithium battery.
11 The iCharger has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity, overrun time and maximum power etc.
12 Supports upgrading the hardware program by USB port or SD card. The iCharger also supports the “Logview” software and can display, plot and analyze the charge and discharge data by it. (See detailed information about Logview at the following website: http://www.logview.info )SKU: 308DUO
iCharger X60 out of 5(0)
The highest power density charger on the market, the X6 is an 800W charger capable of a full 30A rate on LiPos up to 6S. With a balance current of a full 2A, charges will finish faster than ever. The full color IPS display provides a wealth of information at a glance, using the operating system perfected on the larger Duo iChargers.
The X6 can charge at up to 30A, and it can also discharge at up to 30A! While similar size chargers limit their discharge capabilities, the X6 offers iCharger’s trademark support for regenerative discharge, allowing the charger to provide a full 800W of discharge capability when powered from a suitable battery bank.
Despite its small size and low price, this is still a full featured iCharger, with multi-chemistry support and all the depth of settings you’ve come to expect, including an improved software interface for recording battery data and upgrading firmware.
Net weight: 168g
Dimension: 83x65x37 ±0.5mm
Input Voltage Range: 10.0—32.0VDC
Maximum Input Current Limit: <35A
Maximum Charge/Discharge Current: 30A
Maximum Charge Power Capacity: 800W
Maximum Discharge Power Capacity: 30W
Maximum Regenerative Discharge Power Capacity: 800W
Maximum Extra Discharge Power Capacity: 900W @30V/30A
Maximum Current Drain for Balancing: >2ASKU: X6
Ultra Power, Chargers
Ultra Power UP120AC DUO0 out of 5(0)
2 Port 12A Battery Charger Balance LiPo LiHV NiMH AC/DCComes with cables and balance boards. US Plug for AC.Input voltage: AC 110V or 220VDC 11.0-18.0VCharge power: 2x120W (240W)Discharge power: 2x10W (20W)Charge current range: 0.1~12.0ADischarge current range: 0.1~5.0ALiIo/LiPo/LiFe/LiHv cell count: 1~6 seriesNiCd/NiMH battery cell count: 1 – 15cellsPb battery voltage: 2V～20V (1-10cells)Current drain for balancing LiPo: 300mah/cellBattery data memory: 10 profilesWeight: 1.2KGDimension: 180*139*60mmSKU: UP120AC
iCharger 206B0 out of 5(0)
Input Voltage Range: 10 – 28.0VDC
Charge Current Range: 0.05 – 20.0A
Discharge Current Range: 0.05 – 20.0A
Maximum Charge Power Capacity: 300W @ Input voltage > 18V
Internal Discharge Power Capacity: 20W maximum internal
External Discharge Power Capacity: 500W @ 25V/20A
Current Drain For Balancing: <350mA Balance Accuracy: <10mV Lithium (LiPo/LiIo/LiFe) Battery Cell Count: 1 – 6 Series (In non-balance mode, expand LiFe to 8s) NiCd/NiMH Battery Cell Count: 1 – 17 series Pb Battery Cell Count: 1 – 12 series (2 – 24V) Battery Setup Memories: 10 Intelligent Temperature Control: Yes PC Connect: USB port Weight: 350g Dimensions (L X W X D): 134 x 83 x 25mm (5.3" x 3.3" x 1")SKU: 206B