Shop
Showing 49–72 of 193 results
-
4S Lipo, Batteries
Evolution 6000mAh 120C 4S 14.8V Lipo
High AV, Low IR. Rated at continuous 120C. Standard 5mm connectors.
– 120C discharge rating
– Low Resistance
– High AV
– 5mm connectors
– Dimensions: 139mm(L)x47mm(W)x48mm(H)
– Weight: 534g
– Meets ROAR, EFRA, BRCA, and IFMAR specsSKU: SZE6024SB -
2S Lipo, Batteries, Shorty
Evolution 6000mAh 130C 2S 7.6V LiHV Shorty Lipo Battery Pack
High AV, Low IR. Rated at continuous 130C.
Many hours of testing went into the cell composition design, resulting in the pack’s ability to offer the same resistance and average voltage characteristics when running at either normal lipo peak voltage of 4.2v per cell or LiHV peak voltage of 4.35v per cell.
Standard 5mm connectors.
– High capacity for maximum duration
– 130C discharge rating
– Low Resistance
– High AV
– 5mm connectors
– Dimensions: 96mm(L)x47mm(W)x25mm(H)
– Weight: 215g +/- 2g
– Meets ROAR, EFRA, BRCA, and IFMAR specsSKU: SZE601302SB-S -
-
4S Lipo, Batteries
Evolution 6000mAh 140C 4S 14.8V LCG Lipo
High AV, Low IR. Rated at continuous 140C. Standard 5mm connectors.
Please note this is an LCG pack with a length of 144mm.– 140C discharge rating
– Low Resistance
– High AV
– 5mm connectors
– Dimensions: 144mm(L)x47mm(W)x37mm(H)
– Weight: 464g
– Meets ROAR, EFRA, BRCA, and IFMAR specsSKU: SZE6044SL -
2S Lipo, Batteries, LCG
Evolution 6400mAh 130C 2S 7.4V LCG Lipo Battery Pack
The best performing 2S LCG pack we have ever offered!
High capacity, High AV, Low IR.
LCG Pack rated at continuous 130C. Standard 5mm connectors.
The low-profile design allows you to further fine tune the handling characteristics of your car.
– High capacity for maximum duration
– 130C discharge rating
– Low Resistance
– High AV
– Low Profile
– 5mm connectors
– Dimensions: 139mm(L)x47mm(W)x22.4mm(H)
– Weight: 290g
– Meets ROAR, EFRA, BRCA, and IFMAR specsSKU: SZE6432SLB -
2S Lipo, Batteries
Evolution 6400mAh 200C 2S 7.4v Drag Racing Lipo Battery Pack w/XT90 Connector
Our Drag Racing Series Lipo Packs were designed using the highest quality cells and geared for today’s demanding competition drag racing environment. They produce the lowest IR and highest average voltage, making them best in breed.
These are soft case packs and come with 8awg wire and XT90 connector.
High AV, Low IR. Rated at continuous 200C.
– 200C discharge rating
– Low Resistance
– High AV
– 8awg wire
– XT90 connector
– Dimensions: 87mm(L)x65mm(W)x35.5mm(H)
– Weight: 384gSKU: SZED6422S -
4S Lipo, Batteries
Evolution 6500mAh 140C 4S 15.2V LiHV LCG Lipo – XT90
High AV, Low IR. Rated at continuous 140C. XT90 connector.
Please note this is an LiHV LCG pack with a XT90 connector.– 140C discharge rating
– Low Resistance
– LiHV
– XT90 connector
– Dimensions: 138mm(L)x47mm(W)x36mm(H)
– Weight: 492g
– Meets ROAR, EFRA, BRCA, and IFMAR specsSKU: SZE6544SLC -
1S Lipo, Batteries
Evolution 7200mAh 140C 1S 3.7V Lipo Battery Pack
The highest AV and lowest IR we have ever offered in a 1S pack!
Excellent for spec classes and oval racing!
Rated at continuous 140C.
Standard 5mm connectors.
– High capacity for maximum duration
– 140C discharge rating
– Low Resistance
– High AV
– 5mm connectors
– Dimensions: 93mm(L)x47mm(W)x18.5mm(H)
– Weight: 156g
– Meets ROAR, EFRA, BRCA, and IFMAR specsSKU: SZE7241SB -
1S Lipo, Batteries
Evolution 8500mAh 130C 1S 3.7V Lipo Battery Pack
High AV, Low IR. Rated at continuous 130C.
Standard 5mm connectors.
– High capacity for maximum duration
– 130C discharge rating
– Low Resistance
– High AV
– 5mm connectors
– Dimensions: 93mm(L)x47mm(W)x18.5mm(H)
– Weight: 164g
– Meets ROAR, EFRA, BRCA, and IFMAR specsSKU: SZE8531SB -
2S Lipo, Batteries
Evolution Mudboss 5200mAh 50C Lipo Battery Pack 2S 7.4V – Deans Type
Designed for Mudboss class racing. This is a hard case lipo. Comes with direct connect Deans type and standard balance plug. Great power! C rating figure is at continuous discharge.
Evolution Competition Series from Speedzone. More power, punch and voltage!
Dimensions: 138mm(L)x47mm(W)x25mm(H)
Weight: 298g +/- 2gSKU: SZE52502SMD -
ESC
Evolution SC80 80A Spec ESC
The SC80 electronic speed controller (ESC) is specifically designed for 1/10 scale SPEC class electric R/C racing and is suitable for both off-road and on-road classes. It comes factory set in “blinky” mode with the same setup of United States Stock TC ACE Dave Johnson. And although the factory default setting is an optimized setup for “blinky” mode, an optional program box is available to customize settings to suite driving styles in “blinky” mode as well as non-“blinky” mode. The controller is a small foot print 2S LiPo compatible, has a 9.5T and above motor limit and comes with factory installed wires, capacitor and fan.
Specifications:
Continuous Current: 80A
Battery Input: 2S LiPo, 2S LiFe, 4-8 cells NiMh/NiCd
Built-in BEC: 6V@5A
Motor Limit: Over 9.5T
Motor Type: 540 size 2 pole sensored brushless
Size: 32mm(L) x 26mm(W) x 24mm(H – with fan)
Weight: 52g (with fan, wires and capacitor)
ROAR Approved!
SKU: SZESC80 -
Chargers, iCharger
iCharger 206B
Specifications:
Input Voltage Range: 10 – 28.0VDC
Charge Current Range: 0.05 – 20.0A
Discharge Current Range: 0.05 – 20.0A
Maximum Charge Power Capacity: 300W @ Input voltage > 18V
Internal Discharge Power Capacity: 20W maximum internal
External Discharge Power Capacity: 500W @ 25V/20A
Current Drain For Balancing: <350mA Balance Accuracy: <10mV Lithium (LiPo/LiIo/LiFe) Battery Cell Count: 1 – 6 Series (In non-balance mode, expand LiFe to 8s) NiCd/NiMH Battery Cell Count: 1 – 17 series Pb Battery Cell Count: 1 – 12 series (2 – 24V) Battery Setup Memories: 10 Intelligent Temperature Control: Yes PC Connect: USB port Weight: 350g Dimensions (L X W X D): 134 x 83 x 25mm (5.3" x 3.3" x 1")SKU: 206B -
Chargers, iCharger
iCharger 306B
Input voltage range: 4.50 – 38.0VDC
Charge current range: 0.05 – 30.0A
Discharge current range: 0.05 – 30.0A
Maximum charge power capacity: 1000W @ input voltage 23V (500W @ input voltage 12V)
Maximum discharge power capacity: 80W
Maximum regenerative discharge power capacity: 1000W
Maximum extern discharge power capacity: 1200W @ 40V/30A
Current drain for balancing: <500mA Balance accuracy: <10mV Lithium (LiPo/LiIo/LiFe) battery cell count: 1 – 6 series (In non-balance mode, expand LiFe to 12s) NiCd/NiMH battery cell count: 1 – 25 series Pb battery cell count: 1 – 18 series (2 – 36V) Log Files storage: 16Mbit (31 hours) Battery setup memories: 10 Intelligent temperature control: Yes PC Connect: USB port Weight: 750g Dimensions (L X W X D): 143X123X46mm 5.63”X4.84”X1.81”SKU: 306B -
Chargers, iCharger
iCharger 308DUO
30A 1300W Dual Port Battery Charger Discharger – Eligible for FREE shipping!
308DUO Special Features
1 The 308DUO uses advanced Synchronous buck-boost DC/DC converter technology, high power, a high current and high-performance power conversion circuit. The maximum charge power capacity is up to 1300W, the maximum charge/discharge current of a channel is up to 30A, and two channels in Synchronous Mode are up to 50A.
2 Each channel supports 8s LiPo, Lilo, LiFe and NiZn batteries, with maximum 1.2A balance current, and adopts a unique balance calculation of internal resistance correction. Supports 1-20s NiMH/NiCd batteries and 1-15s Pb batteries..
3 With 1A/5V USB charging port, convenient for the user to charge mobile phones and PCs.
4 When the channel output connects the battery after the charger powers on, it will start automatically the anti-sparking protection.
5 Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan speed.
6 Internal temperature protection. When the internal temperature exceeds the Power Reduce temperature, the output power is automatically reduced; and the charger will shut down when temperature exceeds the Shut-down temperature.
7 This charger can save 64 parameters sets and supports the data import/export to SD card
8 A 2.8-inch LCD screen provides rich information including current, voltage, power, capacity, internal resistance, control status, time-consuming and temperature, etc.
9 Multi-discharge features: self-discharge, regenerative to input discharge, and lithium battery extra expanding discharge.10 Supports measurement for internal resistance of battery offline and online. Can measure not only the internal resistance of the entire battery pack, but also measure the internal resistance of each cell within the lithium battery.
11 The iCharger has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity, overrun time and maximum power etc.
12 Supports upgrading the hardware program by USB port or SD card. The iCharger also supports the “Logview” software and can display, plot and analyze the charge and discharge data by it. (See detailed information about Logview at the following website: http://www.logview.info )
SKU: 308DUO -
Chargers, iCharger
iCharger 4010DUO
40A 2000W Dual Port Battery Charger Discharger
4010DUO Special Features
1. The 4010DUO uses advanced Synchronous buck-boost DC/DC converter technology, high power, and high current and high-performance power conversion circuit. The maximum charge power capacity up to 2000W, the maximum charge/discharge current of channel up to 40A, and two channels in Synchronous Mode up to 70A.
2. Channel Supports 10s LiPo, Lilo, LiFe, with maximum 1.2A balance current, adopts unique balance calculation of internal resistance correction .
3. Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan speed.
4. Internal temperature protection. When the internal temperature exceeds the reduce temperature, the output power is automatically reduced; and the charger will shut down when temperature exceeds the cut-temperature.
5. 64 parameters sets can be saved, without repeat setting when use, just import/export via SD card.
6. TFT LCD screen that provides rich information including current, voltage, power, capacity, internal resistance, control status, time-consuming and temperature, etc.
7. Multi-discharge features: discharge-self, regenerative to input discharge, regenerative to channel discharge, and lithium battery extra expanding discharge.
8. Support measurement for internal resistance of battery offline and online. Can measure not only the internal resistance of the entire battery pack, but also measure the per-cell internal resistance of lithium battery.
9. The iCharger has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity, time overrun and maximum power etc.
10. Supports upgrading the hardware program by USB port. The iCharger also supports the “Logview” software and can display, plot and analyze the charge and discharge data by it. (See detail information about Logview in the following website: http://www.logview.info)
SKU: 4010DUO
