SkyRC RSTW Pro Tire Warmer
SKYRC RSTW Tire Warmers are designed to pre-heat rubber tires for 1/10 size touring car.
• Front & Rear temperature can be set independently
• Temperature of 4 tires is controlled by MCU
• Removable front & rear tire warmers
• 8 different beep tones
• Minimum temperature
• Celsius – Fahrenheit selectable display
• Four LED indicators
• Safety timer
Setup and Tuning
Wild Turbo Fan – WTF 30mm x 10mm High Speed Fan0 out of 5(0)
30mm x 10mm high speed fan with dual ball bearings and extension wire. Runs off both receiver (6v) and 2S battery (8.4v) voltages.
Max. RPM in 22,000 @8.4vSKU: WTF3010
Tools, Setup and Tuning
SkyRC LED Pit Light0 out of 5(0)
Skyrc LED pit light with motion sensor to control the brightness of LED. The LED pit light also featured a fold-able design with an aluminum tray for small parts and screws to keep your pit table clean and organised. This LED pit light can be used with a DC power source.SKU: SK-600089
Tools, Setup and Tuning
SkyRC Diff Analyzer For 1/10 RC Cars0 out of 5(0)
The SkyRC Differential Analyzer is a must have tool for setting up and fine-tuning the hardness of differentials for 1/10th scale cars. The Diff Analyzer provides numeric data that helps you replicate a specific hardness, and duplicate your setup after a re-build. No more guessing, no more trying to feel by hand. Now you can get numeric values you can use to measure the diff setting, ensuring consistent hardness after building and setup.
Tiny but Versatile:
The analyzer is powered by any universal Micro USB output or a power bank, weighs just 59 grams and measures 54x28x24.8mm. A precision machined aluminum enclosure creates a thin, durable and aesthetically pleasing design. It includes two 1/10th scale adapters – a hex type adapter for measuring the diff from the wheel nut, and a pin type for measuring from the diff outdrive. Adapters for 1/8th scale and Mini-Z are available separately (not included).
How to Use:
Connect Diff Analyzer to a power bank or any regular Micro 5V USB port.
Connect the diff to the Diff Analyzer and press the power button. Diff Analyzer will show a numeric value for diff being tested. Test duration lasts around 3-5 seconds. Repeat the same procedure for other diffs to have numeric values to compare.SKU: SK-500026-03
Tools, Setup and Tuning
SkyRC Bluetooth Corner Weight System SK-5000360 out of 5(0)
This is the SKYRC Bluetooth Corner Weight System For 1/10 1/12 1/8 RC. RC cars run off the track, tip over, run with tires wore eccentric from time to time. These are the typical results of incorrect CG(Center of Gravity) due to the unbalanced four wheels. Uneven wheel weight distribution will cause the car to sway more in one direction than others. In this circumstance, the car will run unstable, difficult to control!
The enhanced SKYRC SCWS2000 can help RC drivers easily measure and view the RC car’s corner weight distribution through the App. With the accuracy of 1g, RC drivers can precisely adjust their car’s weight at each corner to the best balance to win the race.
Even the slightest difference in weight has a significant difference for RC hobbyists when it comes to the race’s performance and the car’s condition! High-quality aluminum with good toughness is selected as the sensor rebound material. Through the rigid and harsh manufacturing process, we created a high-precision I-shaped sensor. To improve the overall accuracy, the measurement algorithm is enhanced from the predecessor: the precision can be obtained in the shortest time. The default unit is Gram, and switching to Ounce is also available! When inaccuracy is found, the customized in-app program can get the calibration done quickly by tapping the screen three times.
This corner weighting system is empowered by the latest Bluetooth 5.0 chip, which results in faster and more stable connection. When connected with the phone, the last century segment LED as the predecessor is enhanced the intuitive display in full screen!
SKYRC smart weighing system is small and portable in size. It can accurately measure the weight distribution at the racing car’s four corners. So RC racer can quickly adjust the weight at each corner to the best balance effect and win the race.
The App simulates practical scenarios to b intuitive and straightforward. The diagonal wheels are highlighted contrastingly in orange to indicate the selection. This is exactly the RC hobbyists’ paint point when balancing and distributing the weight! The weight and protocol data are transmitted to the mobile App in real-time via Bluetooth. The APP can set each scale by coordinate and save the real-time weight at the respective corner. The total diagonal weight is automatically calculated on the go!
The native emphasis on the ultra-low power consumption of Bluetooth 5.0 and our proprietary protocol get a CR2450 lithium coin battery to deliver the long-lasting, dependable performance of continuous 30 hours.
In the circumstance of the racing field, RC hobbyists use the scales together with the possibility of mixing and getting messed up. Protection with a password will bring peace of mind!
For: 1/10 1/12 1/8 RC Drift / Touring
App-enabled and data display in realtime via Bluetooth
Designed for drift, touring cars
Unit switchable between gram and oz.
Powered by 4 x coin & button batteries.
Measure the car’s corner weight, front and rear distribution and make adjustment if necessary.
The maximum weight limit for each scale is 2000 grams ( total 8000 grams )
Accurate measurement in 0.1g increments ( equivalent to 0.01 oz )
BLE 5.0: Faster Connectivity and higher performance
Long-lasting power on coin battery
Support for 4 languages
Net weight of each scale: 70g
Rated Voltage: 2.6V-3.6V
Rated Current: <10mA@DC3V Battery: CR2450 3V Lithium Coin Battery Maximum weight of each scale: 2000g Tolerance: ±0.1g / 0.1oz Resolution: ±0.1g / 0.01oz Includes: SKYRC Bluetooth Corner Weight System (1 set)SKU: SK-500036