Setup and Tuning, Tools
SkyRC BD250 Battery Discharger Analyzer LiPo/LiHV/NiMH
Availability:
Out of stock
The BD250 is a powerful discharging device that allows the user to discharge a battery at up to 35 amps or 250 watts and also measures and compares the performance of batteries. BD250 allows for the precise measurement of battery capacity and takes the guesswork out of choosing the best battery for your application.
Works on LiPo/LiHV/NiMH.
Upgraded from BD200, BD250 is not only a powerful discharging device but also a precise measurement tool for battery capacity. It takes the guesswork out of choosing the good-performance battery for your application. BD250 offers a maximum of 250 Watts/35 Amps to discharge your battery and will test virtually any battery type or size, any chemistry cells. It’s stylish but small with a high-performance cooling system and uses MOSFETS from the well-known IXYS, to make sure it can discharge at 250 watts continuously.
Size and Weight:
Dimension: 136.6×104.8x107mm
Weight: 879g
Power:
Accepted Voltage Range: 5.40-35.00V
Low Voltage Alert: <5.2V High Voltage Alert: >35V Max.
Discharge Power: 250W
Discharge:
Discharge Current Range: 0.01A-35.00A
Discharge Power: 250W
$99.95
Out of stock
CompareRelated products
-
Tools, Setup and Tuning
SkyRC 1/10 Offroad Buggy Setup System Station SK-600149-01
Thanks to this setup system set in elegant black, which was specially designed for 1/10 buggies, almost all important parameters can be optimized conveniently and easily. After all, the better a RC car is set up, the more fun it gets when racing on the next track.
Adjustable Parameters
- Camber (+/- 10°)
- Toe (+/- 40°)
- Caster (+/- 20°)
- Steering
Includes
4x Measurement gauges for each suspension
1x Toe gaugeSKU: SK-600149-01 -
Tools, Setup and Tuning
SkyRC LED Pit Light
Skyrc LED pit light with motion sensor to control the brightness of LED. The LED pit light also featured a fold-able design with an aluminum tray for small parts and screws to keep your pit table clean and organised. This LED pit light can be used with a DC power source.
SKU: SK-600089 -
Tools, Setup and Tuning
SkyRC Bluetooth Corner Weight System SK-500036
This is the SKYRC Bluetooth Corner Weight System For 1/10 1/12 1/8 RC. RC cars run off the track, tip over, run with tires wore eccentric from time to time. These are the typical results of incorrect CG(Center of Gravity) due to the unbalanced four wheels. Uneven wheel weight distribution will cause the car to sway more in one direction than others. In this circumstance, the car will run unstable, difficult to control!
The enhanced SKYRC SCWS2000 can help RC drivers easily measure and view the RC car’s corner weight distribution through the App. With the accuracy of 1g, RC drivers can precisely adjust their car’s weight at each corner to the best balance to win the race.
Even the slightest difference in weight has a significant difference for RC hobbyists when it comes to the race’s performance and the car’s condition! High-quality aluminum with good toughness is selected as the sensor rebound material. Through the rigid and harsh manufacturing process, we created a high-precision I-shaped sensor. To improve the overall accuracy, the measurement algorithm is enhanced from the predecessor: the precision can be obtained in the shortest time. The default unit is Gram, and switching to Ounce is also available! When inaccuracy is found, the customized in-app program can get the calibration done quickly by tapping the screen three times.
This corner weighting system is empowered by the latest Bluetooth 5.0 chip, which results in faster and more stable connection. When connected with the phone, the last century segment LED as the predecessor is enhanced the intuitive display in full screen!
SKYRC smart weighing system is small and portable in size. It can accurately measure the weight distribution at the racing car’s four corners. So RC racer can quickly adjust the weight at each corner to the best balance effect and win the race.
The App simulates practical scenarios to b intuitive and straightforward. The diagonal wheels are highlighted contrastingly in orange to indicate the selection. This is exactly the RC hobbyists’ paint point when balancing and distributing the weight! The weight and protocol data are transmitted to the mobile App in real-time via Bluetooth. The APP can set each scale by coordinate and save the real-time weight at the respective corner. The total diagonal weight is automatically calculated on the go!
The native emphasis on the ultra-low power consumption of Bluetooth 5.0 and our proprietary protocol get a CR2450 lithium coin battery to deliver the long-lasting, dependable performance of continuous 30 hours.
In the circumstance of the racing field, RC hobbyists use the scales together with the possibility of mixing and getting messed up. Protection with a password will bring peace of mind!
Features:
For: 1/10 1/12 1/8 RC Drift / Touring
Material: Plastic
Color: Black
App-enabled and data display in realtime via Bluetooth
Designed for drift, touring cars
Unit switchable between gram and oz.
Powered by 4 x coin & button batteries.
Measure the car’s corner weight, front and rear distribution and make adjustment if necessary.
The maximum weight limit for each scale is 2000 grams ( total 8000 grams )
Accurate measurement in 0.1g increments ( equivalent to 0.01 oz )
BLE 5.0: Faster Connectivity and higher performance
Long-lasting power on coin battery
Support for 4 languagesSpecifications:
Dimension: 68x68x22.5mm
Net weight of each scale: 70g
Rated Voltage: 2.6V-3.6V
Rated Current: <10mA@DC3V Battery: CR2450 3V Lithium Coin Battery Maximum weight of each scale: 2000g Tolerance: ±0.1g / 0.1oz Resolution: ±0.1g / 0.01oz Includes: SKYRC Bluetooth Corner Weight System (1 set)SKU: SK-500036
There are no reviews yet.